'U' Series
'T' Series
'C' Series
'K' Series
'R' Series
Polylined KGV
Hy-Seal 'E' Series
Hy-Seal 'M' Series
Concentric Check Valve
Hy-Stroke Linear Actuators


14/78 Reserve Road
Artarmon, NSW  2064
PO Box 116
Artarmon. NSW - 1570
Tel: +61 2 9437 3288
Fax: +61 2 9437 3211
email: hpvalves@hpvpl.com

 'T' Series

The 'T' Series Pinch Valve is designed specifically to replace Diaphragm Valves and has the same face-to-face dimension. This single anvil valve out performs and outlasts most diaphragm valves.

The 100% Full Port design eliminates any dead spots or crevices and the valve is an extension to the pipe in the fully open position, with no turbulence and no head loss.

The self-cleaning flexing action of the sleeve eliminates in line scaling and line blockage The valve is bi-directional and offers drop tight shut off across the full pressure range

Full pressure rating is maintained throughout the size range, i.e. it does not decrease in the larger valve sizes. However mechanical assistance in the form of actuation may be necessary for sizes 200 mm and above.

The field replaceable sleeve extends in line service and lowers maintenance costs. The sleeves are available in a wide range of elastomers and trims to meet exact service and flow specifications. All mechanical parts are completely isolated from the medium

The valves has only five major components, making it easy to use, easy to maintain and extremely fitter friendly.

The valves are supplied with manual Hand wheel operation or may be fitted with all types of Actuators for both ON / OFF and accurate repeatable linear flow control.


 C Series

 K Series

HP Sleeve

High Pressure KGV
2009 HY-PERFORMANCE VALVES PTY LTD  All Rights Reserved  Standard Terms and Conditions